Loading Instructions
Loading instructions are very useful for certain recurring transports. The loading instructions describe concrete measures of how to optimally secure cargo at certain transports
For all members of staff, the loading instructions are a compulsory in-plant directive, which they have to observe. In addition to the corresponding training, it is recommended to issue loading instructions and other advice to explain the in-plant procedures relevant to safety of loads to the relevant people, for example in the form of a driver’s handbook. This is a useful instrument for the company/management to prove that they fulfilled their responsibilities concerning occupational safety and traffic legislation.
Before cargo can be secured on a vehicle and before the safety of loads can be proven in test, the suitability of the cargo for transport must be assessed. Our experts support you in this task. Our tilting table can be used to assess and document the tip- and form stability of cargo. With the results of these tests, you will receive certificates which – in connection with static and/or dynamic test according to EN 12642 – enables us to develop easy to understand loading instructions.
We offer consulting services to hauliers and vehicle fleet managers regarding questions of safety of loads and we can issue loading instructions to loaders.
Loading
Loading requirements
A load on a heavy vehicle must:
not be placed in a way that makes the vehicle unstable or unsafe
be secured so it is unlikely to fall or be dislodged
be restrained using an appropriate restraint method
be placed, secured or restrained in a way that meets the loading performance standards listed in Schedule 7 of the Heavy Vehicle (Mass, Dimension and Loading) National Regulation.
Load Restraint Guide
The Load Restraint Guide 2018 provides drivers, owners, operators, freight consigners, vehicle manufacturers, equipment manufacturers and suppliers with the basic safety principles that should be followed when designing a load restraint system to ensure the safe and efficient transportation of loads.
Changes to regulations
The Heavy Vehicle (Mass, Dimension and Loading) National Regulation (MDL regulation) prescribes heavy vehicle dimensions, mass and loading requirements. The MDL regulation was amended on 1 October 2018 to incorporate, among other things, the load restraint performance standards.
The MDL regulations also provide alternative compliance requirements for vehicles where a mass or dimension exemption applies, for example very large loads.
These alternative compliance requirements apply if:
a mass or dimension exemption is in force for the vehicle for the journey; and
the vehicle complies with the mass or dimension exemption; and
an engineer has given a certificate.
FAQs
What has changed in the Load Restraint Guide 2018?
The guidance material contained in the Load Restraint Guide 2018 has been updated to ensure it:
is easy to access and understand
meets the needs of the target audience
is accurate, up to date and reflects current load restraint practices and heavy vehicle technology
provides information based on the key steps involved in transporting loads to assist heavy vehicle drivers, operators and other parties to develop load restraint systems to suit their individual requirements
includes computer-generated diagrams and graphics to provide greater detail.
provides detailed worked examples demonstrating how to apply the load restraint principles provided in the Guide to the common freight commodities.
GUIDE TO THE PARTIAL TRUCKLOAD SERVICES
This guide will help you understand how the partial truckload service works
We address the following topics:
What is partial truckload freight shipping?
Load size and weight specifications for partial load transport.
Advantages of partial load freight shipping
On what shipping lanes is the partial truckload service
The successful transloading of goods being transported in Partial truckload service
Types of transport equipment available for Partial truckload freight services
What information should I provide when requesting a quote for a Partial truckload freight service? How do I know if my cargo can be shipped using Partial truckload transportation mode?
WHAT IS PARTIAL TRUCKLOAD FREIGHT SHIPPING?
Partial truckload transportation is the ideal and most economical transportation option for larger loads that do not require to use all the space available on a full trailer. It is more affordable than the Full Truckload freight service because the customer doesn’t pay for a dedicated trailer. In a partial truckload mode, customers have the opportunity to ship larger loads than allowed in a Less Than Truckload transport service.
WEIGHT AND SIZE SPECIFICATIONS FOR PARTIAL TRUCKLOAD FREIGHT
The partial truckload transport mode is available for loads that have the following characteristics:
THE NUMBER OF PALLETS AND DIMENSIONS FOR PARTIAL TRUCKLOADS:
Greater than 12 linear feet (6 standard size pallets).
Less than 30 linear feet.
MAXIMUM AND MINIMUM WEIGHT FOR PARTIAL TRUCKLOADS:
Maximum total weight is 25,000 pounds.
Minimum total weight 1000lbs
THE ADVANTAGE OF PARTIAL TRUCKLOAD FREIGHT SERVICES: SUBSTANTIAL SAVINGS
If the load occupies between 12-30 linear feet, choosing the partial truckload mode of freight transport, either in the complete route or in part of the international transport route, can save you up to 50% of the transport cost; compared to moving merchandise in FTL mode throughout the whole transportation route.
LOADING HELP FOR YOUR TRUCK OR CONTAINER
Loading your rental truck, freight trailer, or moving container is one of the most difficult tasks when moving. It’s important to available to correctly load your furniture and fragile items, both to prevent damage during the move as well as to maximize your available space. Not having enough available space will create numerous additional hassles and should be avoided, especially if you had sufficient space but couldn’t make all of the items fit due to improper loading.
WHY HIRE LOADING HELP?
MOVERS ARE FASTER
We’re not saying you’re out of shape, but you’re probably not in mover shape. Loading a moving truck or container is hard work, and it takes a lot of unique physical conditioning to be in mover shape. Simply put, movers will load your moving truck faster than you and your friends will.
MAXIMIZE TRUCK SPACE
Pro movers are trained to maximize the available space on your moving truck, trailer or container. Wasted space is wasted money. Just like a game of Tetris, the best movers will utilize every inch of space. And, whenever possible, use less space than estimated, which may save you money!
HIRE MOVERS ANYWHERE
Our moving marketplace offers more than 700 movers nationwide to help load your truck. From big cities to rural areas, we have local movers ready to help you move.
WE DO THE HEAVY LIFTING
Let the movers do the heavy lifting so you don’t have to! Moving furniture isn’t fun, especially during the summer. Instead, sip some iced tea while the movers take care of the heavy stuff.
Moving Help: Your Complete Guide
When moving, everyone needs a little moving help. Relocating comes with lots of decisions, including how to get your belongings from point A to point B. With various types of moving help available, it can be difficult to figure out what option is best for your move. That’s why we’ve broken down the top four choices for you.
Moving Help: Renting a Moving Truck
If you want to take on a DIY move, renting a moving truck is a great option for a moving service. Once you sort out the logistics of your move, reserving a moving truck is a fairly seamless process.
Choosing the right rental truck
You’ll want to reserve a moving truck that fits with the exact needs of your move. For starters, are you moving locally or long distance? Certain moving truck companies will only rent out trucks for local moves, while other companies offer national truck rentals. While some companies start charging when you exceed a set mileage, others offer free, unlimited miles.
Loading your moving truck
Loading your truck may seem intuitive, but there is a recommended method for packing a moving truck. When loading heavy items, you should pack them in an “I-formation” to ensure a safer and faster move. Starting in the front of the box truck by the cab, load your heavy items, like your washing machine and refrigerator. If you are transporting these items yourself, you may want some moving help from a moving labor service (unless you happen to have a team of very strong people on hand).
Next, pack your heaviest pieces of furniture in the middle of the truck. Slightly lighter items, such as couches or mattresses, can go to either side of the heavy furniture. Any other big boxes can then be placed in the back of the truck to complete the “I formation.” If you need help finding boxes for your move, there are several places you can find free moving boxes.